Datsun Roadster Front Suspension Coils
A Set of two Uprated front coils, perfectly matching the parabolic leaf springs. They are powder coated.

Cost: AUD 169.00 including GST
Note: Shipping costs to be added.

Datsun Roadster Single leaf, Parabolic springs, 1500, 1600, 2000 & Silvia CSP311
What you will get:-
New set of 2 Single leaf springs (rear), including spacer blocks, and bushes, leaf springs are powder coated black).
These Single Leaf Springs are suitable for the performance based driver. The spring rate has been selected for best road handling without any compromise to comfort. Nothing else comes close!
They will bolt straight in, nothing more to do! Except for enjoying the ride.
Note: They have been used by Geoff Duggan, first place under handicap at the "Wrest Point Targa 2010" in his 1969 Datsun Roadster 2000 Sports. This is the ultimate in Datsun Roadster Suspension Set up!
Please note: With this set up, it is recommended that the front suspension coils are upgraded (they are available on request).
** For track work there is a slightly stiffer version available.
Cost: AUD 729.00 including GST
Note: Shipping costs to be added.

Datsun Roadster Sway Bar Retainer clip's (outer)
These clips (right and left) are an accurate copy of the original, and come with two Phillips 10/32 screws.
Cost AU$ 74.00 for a set of two (includes 10% GST)
Note: Shipping costs to be added

Datsun Roadster Tramp/Torque Rod Kit right or left
This is a complete kit for either the right or the left hand side. It comes with brackets, bolts, and torque rod, as per picture. These brackets are a copy of the original. They will need to be fitted up, and welded to the chassis, and differential respectively.
Please specify right or left hand side.
Cost AU$ 598.00 each (includes 10% GST)
Note: Shipping costs to be added

Datsun Roadster Tramp/Torque Rod Bracket
.............(Chassis right hand side)........
This bracket is a copy of an original. The main bracket, and the stiffener gusset will need to be fitted up, and welded to the chassis.
Cost AU$ 285.00 each (includes 10% GST)
Note: Shipping costs to be added

Datsun Roadster Tramp/Torque Rod Kit Complete
This is a complete kit for both sides, (right and left). It comes with brackets, bolts, and torque rods, as per picture. These brackets are a copy of the original, and have been mirrored for the other side. They will need to be fitted up, and welded to the chassis, and differential respectively.
Cost AU$ 1150.00 each (includes 10% GST)
Note: Shipping costs to be added

Datsun Roadster Tramp/Torque Rod Bracket
.............(Chassis left hand side)........
This bracket is a copy of an original, in the mirrored version. The main bracket, and the stiffener gusset will need to be fitted up, and welded to the chassis.
Cost AU$ 285.00 each (includes 10% GST)
Note: Shipping costs to be added

Datsun Roadster Tramp/Torque Rod Bracket
.......................(Diff side).........................
This bracket is a copy of an original. It will need to be fitted up, and welded to the Diff. housing
Cost AU$ 120.00 each (includes 10% GST)
Note: Shipping costs to be added